The EXC-8000PCIe/xx card for the PCI Express bus supports up to eight dual redundant MIL-STD-1760 channels using the M8K1760Px(S) module and is compatible with all common variations of MIL-STD-1760 (A, B). In addition, Checksum, SRQ bit and Header Words are supported on each channel.
Multi Function:
Each channel using the M8K1760Px module operates simultaneously as a Bus controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. In addition, error injection (BC and RT modes) and error detection (all modes) are supported on each channel.
Single Function:
Each channel using the M8K1760PxS module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.
The EXC-8000PCIe/xx is supplied with C drivers, including source code, Merlin+ Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.
Mating connectors and cable adapters for I/O connection can be purchased seperately.
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
Ordering Information:
| Part Number |
Description |
| EXC-8000PCIe/xx |
Multi-protocol interface for PCI Express compatible systems (up to 8 modules) |
| EXC-8000PCIeHC/xx |
Multi-protocol interface for PCI Express compatible systems (up to 4 modules) |
| Lx M8K1760Px |
MIL-STD-1760 interface module: supports BC, multiple RTs,
BC/Concurrent-RT and BM modes. |
| Hx M8K1760PxS |
MIL-STD-1760 interface module: supports BC, RT or BM modes. |
| X8K-xx |
50cm cable adapter for EXC-8000 card [optional] |
| EXC-8000CON |
Connector assembly [optional] |
Note:
"xx” specifies the modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.