Software Applications

Excalibur Systems provides software utilities and applications programs to manage data communications for our products, which include Bus Controllers, Bus Monitors, Data Recorders and analytical flight Data Reconstructors. There are different applications for single & multi function MIL-STD-1553 and ARINC-429.

Exalt Plus - Excalibur's Analysis and Laboratory Tool

EXALT Plus - Excalibur's comprehensive analytical laboratory tool - is a user-friendly software monitor program that is comfortable and intuitive for users.

Merlin - for MIL-STD-1553 Product Families

Merlin is a richly featured program for simulating MIL-STD-1553 Bus Controllers, Remote Terminals, and Bus Monitors. Data can be monitored on screen or recorded to file for later viewing. Error injection can be simulated.

Mystic - for ARINC-429 Product Families

Mystic allows engineers to simulate, transmit, or receive ARINC-429 data. Data can be viewed in binary, decimal or hex units, with a choice of standard and Engineering units, which can be customised as required.

CommMonitor

For EXC-1553/Px AND DAS-429PCI/Mx Product Families

Data Reconstructor (1553)

Excalibur's MIL-STD-1553 Data Reconstructor utility is a tool for recreating a data transmission stream from a Merlin Plus or Exalt log file.

Data Reconstructor (429)

Excalibur's ARINC-429 Data Reconstructor utility is a tool for recreating a data transmission stream from a Mystic log file.

Serial Simulation Laboratory

Serial Simulation Laboratory is a Windows based GUI tool that enables the user to send and receive serial packets using the M4K or M8K Serial module without the need for programming.

Discrete Generator

The Discrete Generator is an application program that enables you to configure the Discrete channels on your Discrete module, run the module and view the status of incoming Discretes.

Weather Radar 708 - GUI

A simple monitoring program for ARINC-708 modules.

Showhex

ShowHex allows the user to view, search, and even modify the contents of the memory of any installed Excalibur product - enabling user-controlled start, stop and reset of the board on the fly.

ExcConfig - Excalibur Configuration Utility

Use ExcConfig to assign a device number and system resources (Memory Addresses, I/O port setup, IRQ Line) to your Excalibur board. This is the method used to inform the Windows operating system that you want to assign resources to an installed board.
contact us
Your message was sent successfully
 
Home Login