The ES-9810/xx (RUNET II) is a rugged standalone unit that attaches to an Ethernet port of a standard PC to enable a program to control up to four independent 8000 family avionic's communication modules
Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus.
The ES-9810/xx is supplied with C drivers, including source code.
Mating connectors and cable adapters for I/O connection can be purchased seperately.
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
Ordering Information:
Part Number |
Description |
ES-9810/xx |
Multi-protocol interface (up to 4 modules) for Ethernet systems |
Note:
"xx” specifies the modules ordered with the carrier board (up to 4 modules).
Mating Connectors & Cable Assemblies are NOT INCLUDED
Note: "xx” specifies a protocol.
A* - ARINC-429 |
Five programmable channels
A1 = 5 receive channels A2 = 4 receive 1 transmit A3 = 3 receive 2 transmit
A4 = 2 receive 3 transmit A5 = 1 receive 4 transmit A6 = 5 transmit channels
|
C* - ARINC-708 |
Two programmable channels
C1 = 1 transmit 1 receive C2 = 2 receive channels
|
D* - H009 |
One H009 channel
|
H* - MIL-STD-1760 |
One single function channel
H1 = transformer coupled H2 = direct coupled
|
I* - Discrete I/O |
10 D I/O, TTL/Avionics 0-32V DC
I1 = 10 channel input I2 = 4 chnl output 6 chnl input
I3 = 6 chnl output 4 chnl input I4 = 10 channel output
|
J* - RS232/422/485 |
Two channels, Baud rate RS-232 up to 3 Mbps, RS-422/485 up to 4 Mbps
J1 = 2 channel RS-232 J2 = RS-232 / RS-485 J3 = RS-232 / RS-422
J4 = 2 channel RS-485 J5 = RS-485 / RS-422 J6 = 2 channel RS-422
|
M* - MIL-STD-1760 |
Monitor only (transmit disabled)
M1 = transformer coupled M2 = direct coupled
|
N* - ARINC-717 |
Two channels Rx/Tx, HBP and BPRZ signals
N1 = HBP N2 = BPRZ
|
P* - ADDA |
up to 10 single ended, or 5 differential, digital-to-analog (DAC) output channels, as well as 5 single ended or 5 differential analog-to-digital (ADC) input channels.
P1 = DAC outputs only (10 Single Ended or 5 Differential)
P2 = ADC inputs only (5 Single Ended or 5 Differential)
P3 = Combined DAC and ADC
(4 Single Ended or 2 Differential DAC outputs and 3 Single Ended or 3 Differential ADC inputs)
|
R* - MMSI |
Five channels meets requirements of AS5643, 10Mbps 1553 Protocol/RS-485 Transceivers
R5 = 5 EBR-1553 hub ports and 1 cBM port
|
S* - ARINC-825
(canbus)
|
Five channels
S5 = 5 ARINC-825 channels
|
T* - MIL-STD-1553 |
One single function channel
T1 = transformer coupled T2 = direct coupled
|
V* - MIL-STD-1553 |
Monitor only (transmit disabled)
V1 = transformer coupled V2 = direct coupled
|
-S = Ground return isolated from shield -IP = Ingress Protection