The EXC-8000PCIe104 is a multiprotocol PCI/104-Express interface board for embedded applications or avionics test and simulation applications. Each board holds up to four independent modules and 10 discrete channels. The modules can be any one of the following types:
M8K1553PxS (Single Function - RT validated) This module operates as a Bus Controller, Remote Terminal or a Bus Monitor. This module qualifies for airborne applications.
M8K1553Px (Multi Function) This module operates as a Bus Controller, up to 32 Remote Terminals and as a Bus Monitor. Supports an Internal Concurrent Monitor in RT and BC/RT modes.
M8K1553Px(S)-1760 Same as M8K1553Px(S) plus MIL-STD-1760 options.
M8KMMSI Mini Munitions Store Interface module. Supports RT, BC/Concurrent-RT/Concurrent Monitor and Bus Monitor modes. Up to 4 hub ports EBR-1553 [10 Mbps 1553 protocol using RS-485 transceivers] and 1 monitor output.
M8K429RTx Based on our ARINC 429RxTx board. This module supports five ARINC 429 channels each of which can be configured in real time as a receive or transmit channel.
M8K708 This module supports two channels of ARINC 708/453, each one selectable as either transmit or receive.
M8KSerial This module supports up to 2 independent channels of serial communications, each of which can be selected as RS485, RS422 or RS232.
M8KDiscrete This module supports 8 selectable input/open collector output discretes. The module supports TTL (0 to 5 volts) or avionics (0 to 32 volts) voltage levels.
M8K825CAN This module supports up to 5 independent channels of ARINC-825 protocol.
Please see our Dragon rugged PC/104 system for a complete PC/104 solution.
Please see multi protocol modules for additional information on protocols that can be added to this card.
|EXC-8000PCIe104/xx||Multi-protocol interface for PCI/104-Express compatible systems.|
“xx” specifies the modules ordered with the carrier board (up to 4 modules).
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-R" Ruggedized Configuration
"-001" added to the end of the part number specifies conformal coating option.