EXC-8000cPCI/xx card & M8K1553Px(S) module
The EXC-8000cPCI/xx card for Compact PCI computers supports up to six dual redundant 1553 channels using the M8K1553Px(S) module and is compatible with all common variations of MIL-STD-1553 (A, B).
Each channel using the M8K1553Px module operates simultaneously as a Bus controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. In addition, error injection (BC and RT modes) and error detection (all modes) are supported on each channel.
Each channel using the M8K1553PxS (RT validated) module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.
The EXC-8000cPCI/xx is supplied with C drivers (including source code), Merlin+ Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
|EXC-8000cPCI/xx||Multi-protocol interface for Compact PCI (3U) compatible systems.|
|EXC-8000cPCI/xx-002||Same as above with P2 Rear I/O connector. For 32-bit systems only.|
|Fx M8K1553Px||MIL-STD-1553 interface module: supports BC, multiple RTs, BC/Concurrent-RT and BM modes.|
|Tx M8K1553PxS||MIL-STD-1553 interface module: supports BC, RT or BM modes. (RT Validated-Single Function)|
|X8K-xx||50cm cable adapter for EXC-8000 card [optional]|
|EXC-8000CON||Mating connector assembly [optional]|
“xx” specifies the modules ordered with the carrier board."-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option