The RUNET II, ES-9810/F1 & ES-9810/T1 devices, are intelligent, rugged multi channel, MIL-STD-1553 adapters. Its small size and ability to interface through Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the MIL-STD-1553 bus, both in the lab and in rugged environments.

The ES-9810 shares its API with the entire Px family so that applications currently running on PCI, PCIe, ExCARD or PCMCIA boards will run without change on this device.

Multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.

Multi Function

Each channel of the ES-9810/F1 operates simultaneously as a Bus Controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. The card supports error injection and detection. The adapter’s small size and compatibility with any computer using Ethernet, makes it the perfect solution for performing system simulation of the MIL-STD-1553 bus, in the lab and in rugged environments. 

Single Function 

Each channel of the ES-9810/T1 operates either as a Bus Controller, Remote Terminal, or Bus Monitor. 

The ES-9810/F1 and ES-9810/T1 adapters are supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.

Ordering Information:

Part Number  Description
ES-9810/F1xxx   Single channel MIL-STD-1553 multi function interface box
ES-9810/T1xxx  Single channel MIL-STD-1553 single function interface box

Mating Connectors & Cable Assemblies are NOT INCLUDED

Note:      "x”   specifies a protocol.  

Additional options:

A* -  ARINC-429 

A0 = Five programmable channels 


C* -  ARINC-708

Two programmable channels

C1 = 1 transmit 1 receive     C2 = 2 receive channels

D* -  H009

One H009 channel

H* - MIL-STD-1760

One single function channel

H1 = transformer coupled     H2 = direct coupled

I* -  Discrete I/O

I0 = programmable 10 D I/O, TTL/Avionics 0-32V DC


J* - RS232/422/485             

Two channels, Baud rate RS-232 up to 3 Mbps, RS-422/485 up to 4 Mbps

J1 = 2 channel RS-232     J2 = RS-232 / RS-485     J3 = RS-232 / RS-422

J4 = 2 channel RS-485     J5 = RS-485 / RS-422     J6 = 2 channel RS-422

M* - MIL-STD-1760

Monitor only (transmit disabled)

M1 = transformer coupled      M2 = direct coupled

N* - ARINC-717

Two channels Rx/Tx, HBP and BPRZ signals

N1 =  HBP       N2 = BPRZ


up to 10 single ended, or 5 differential, digital-to-analog (DAC) output channels, as well as 5 single ended or 5 differential analog-to-digital (ADC) input channels.

P1 = DAC outputs only (10 Single Ended or 5 Differential)

P2 =  ADC inputs only (5 Single Ended or 5 Differential)

P3 = Combined DAC and ADC

(4 Single Ended or 2 Differential DAC outputs and 3 Single Ended or 3 Differential ADC inputs)


Five channels meets requirements of AS5643, 10Mbps 1553 Protocol/RS-485 Transceivers

R5 = 5 EBR-1553 hub ports and 1 cBM port     

S* - ARINC-825 


Five channels

S5 = 5 ARINC-825 channels

T* - MIL-STD-1553

One single function channel

T1 = transformer coupled     T2 = direct coupled

V* - MIL-STD-1553

Monitor only (transmit disabled)

V1 = transformer coupled      V2 = direct coupled

            -S = Ground return isolated from shield
           -IP = Ingress Protection


Request More Information