The EXC-8000PCIe/xx card for the PCI Express bus supports up to four dual redundant H009 channels using the M8KH009 module. Each of the independent, dual-redundant M8KH009 modules may be programmed to operate in one of three modes of operation: Central Control Complex (CCC) mode with Concurrent Peripheral Unit operation (1–16 PUs), Peripheral Unit mode (Multiple – up to 16 PUs) and Bus Monitor mode. In addition, the module can simultaneously operate as an independent Internal Concurrent Monitor in CCC, Multiple PU or CCC/Concurrent PU modes.
The EXC-8000PCIe/xx is supplied with C drivers, including source code, Windows application software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.
Mating connectors and cable adapters for I/O connection can be purchased seperately.
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
Ordering Information:
| Part Number |
Description |
| EXC-8000PCIe/xx |
Multi-protocol interface for PCI Express compatible systems |
| Dx M8KH009 |
H009 interface module for the Excalibur 8000 family of carrier board. |
| X8K-xx |
50cm cable adapter for EXC-8000 card [optional] |
| EXC-8000CON |
Connector assembly [optional] |
Note:
"xx” specifies the modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.