The EXC-664PCIe board is an ARINC-664 part 7 test and simulation board designed to help integrate avionics suites, and can simulate up to two ARINC-664 P7 End Systems with full dual redundant support for receive and transmit operation. The board also contains room for two standard 4000 modules that can support multiple channels of other avionics communications protocols including MIL-STD-1553, ARINC-429, Serial, Discrete, ARINC-708 and CANbus.
The EXC-664PCIe supports two receive networks and two transmit networks. The receive and transmit functions are completely independent and may be used as a dual redundant network or independently. The board has a universal PCI Express interface that is compatible with any PCI Express slot.
Transmit functionality includes defining Virtual Links (VLs) and subVLs. VLs can have assigned maximum sizes and Bandwidth Allocation Gaps (BAGs.) SubVLs are associated with Sampling, Queuing and SAP ports. The user may simulate VLs from multiple End Systems (ESs).
Two methods for receiving messages are available.
In sequential monitoring mode all packets are stored in the order in which they are received. The user may select on a VLid basis which packets to store with data, which to store header only and which not to store at all.
In VL based monitoring mode packets are stored based on the VLid and port address to which they are addressed. Queuing and SAP messages are reconstructed if they are sent in multiple packets and the user may select to store multiple buffers for these message types.
The EXC-664PCIe/xx is supplied with C drivers (including source code) and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application. Mating connector provided for I/O connection.
Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.
|EXC-664PCIe/1-xx||ARINC-664 Interface for PCI Express compatible systems [1 664 module].|
|EXC-664PCIe/2-xx||ARINC-664 Interface for PCI Express compatible systems [2 664 modules].|
"xx” specifies the non 664 modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.