The ES-9810/xx is a Ethernet rugged adapter supporting up to twenty ARINC-429 channels in any combination of transmit and/or receive. All of the channels feature error injection and detection.adapter. Its small size and ability to interface through Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the ARINC-429 bus in rugged environments.
The receive channels allow for the storage of all selected labels with status and time tag information appended to each word, and also allow for filtering and multi-storage modes of data words.
The transmit channels operate via a transmit ‘instruction stack’ which allows scheduling of data transmissions and reduces the need for host computer intervention.
The ES-9810/xx supports up to four independent 8000 family avionics communication modules, allowing multiple different protocols to be mixed and matched on a single card.
Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus.
In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.
The ES-9810/A0 adapter is supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher).
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
Ordering Information:
| Part Number |
Description |
| ES-9810/A0xxx |
5 channel ARINC-429 interface for Ethernet equipped computers |
Note:
"xx” specifies the modules ordered with the carrier board (up to 4 modules).
"-001" added to the end of the part number specifies conformal coating option.
Mating Connectors & Cable Assemblies are NOT INCLUDED
Note: "x” specifies a protocol.
Additional options:
| A0 - ARINC-429 |
Five programmable channels
|
| C0 - ARINC-708 |
Two programmable channels
|
| D* - H009 |
One H009 channel
|
| H* - MIL-STD-1760 |
One single function channel
H1 = transformer coupled H2 = direct coupled
|
| I0 - Discrete I/O |
10 D I/O, TTL/Avionics 0-32V DC
|
| J* - RS232/422/485 |
Two channels, Baud rate RS-232 up to 3 Mbps, RS-422/485 up to 4 Mbps
J1 = 2 channel RS-232 J2 = RS-232 / RS-485 J3 = RS-232 / RS-422
J4 = 2 channel RS-485 J5 = RS-485 / RS-422 J6 = 2 channel RS-422
|
| M* - MIL-STD-1760 |
Monitor only (transmit disabled)
M1 = transformer coupled M2 = direct coupled
|
| N* - ARINC-717 |
Two channels Rx/Tx, HBP and BPRZ signals
N1 = HBP N2 = BPRZ
|
| P* - ADDA |
up to 10 single ended, or 5 differential, digital-to-analog (DAC) output channels, as well as 5 single ended or 5 differential analog-to-digital (ADC) input channels.
P1 = DAC outputs only (10 Single Ended or 5 Differential)
P2 = ADC inputs only (5 Single Ended or 5 Differential)
P3 = Combined DAC and ADC
(4 Single Ended or 2 Differential DAC outputs and 3 Single Ended or 3 Differential ADC inputs)
|
| R* - MMSI |
Five channels meets requirements of AS5643, 10Mbps 1553 Protocol/RS-485 Transceivers
R5 = 5 EBR-1553 hub ports and 1 cBM port
|
|
S5 - ARINC-825
(canbus)
|
5 ARINC-825 channels
|
| T* - MIL-STD-1553 |
One single function channel
T1 = transformer coupled T2 = direct coupled
|
| V* - MIL-STD-1553 |
Monitor only (transmit disabled)
V1 = transformer coupled V2 = direct coupled
|
-S = Ground return isolated from shield -IP = Ingress Protection