The EXC-1553UNET/Px-1760 is an intelligent, single- or dual-channel, MIL-STD-1760 adapter. Its small size and ability to interface through USB or Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the MIL-STD-1760 bus, both in the lab and in the field.
The EXC-1553UNET/Px-1760 shares its API with the entire Px family so that applications currently running on PCI, PCIe, ExCARD or PCMCIA boards will run without change on this device.
Multiple units can operate via USB ports on the same computer. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.
In addition the EXC-1553UNET/Px(S)-1760 provides 8 I/O Discrete signals and an IRIG B input.
Each channel of the EXC-1553UNET/Px-1760 operates simultaneously as a Bus Controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. The card supports error injection and detection. The adapter’s small size and compatibility with any computer using USB or Ethernet, makes it the perfect solution for performing system simulation of the MIL-STD-1760 bus, in the lab and in the field.
Each channel of the EXC-1553UNET/PxS-1760 operates either as a Bus Controller, Remote Terminal, or Bus Monitor.
The EXC-1553UNET/Px-1760 and EXC-1553UNET/PxS-1760 adapters are supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher).
|EXC-1553UNET/P1-1760||Single channel MIL-STD-1760 multi function interface card for USB or Ethernet compatible computers.|
|EXC-1553UNET/P2-1760||Dual channel MIL-STD-1760 multi function interface card for USB or Ethernet compatible computers.|
|EXC-1553UNET/P1S-1760||Single channel MIL-STD-1760 single function interface card for USB or Ethernet compatible computers.|
|EXC-1553UNET/P2S-1760||Dual channel MIL-STD-1760 single function interface card for USB or Ethernet compatible computers.|
Note: "-M" specifies panel mounted with BJ157 connectors
"-C" specifies hard-wired 1553 cable connection
"-D" 1553 Direct bus coupling.
"-R" hard-wired cable connection
"-P" mounting plate
"-B" internal rechargeable battery