EXC-8000cPCI/xx card & M8KADDA module
The EXC-8000cPCI/xx card for Compact PCI systems supports up to sixty A to D & D to A channels using the M8KADDA module. The M8KADDA module supports up to 10 single ended, or 5 differential, digital-to-analog (DAC) output channels, as well as 5 single ended or 5 differential analog-to-digital (ADC) input channels. Each DAC channel has a 16-bit resolution and can sink or source up to 25mA. User selectable voltage ranges are available that provide either full scale bipolar or full scale unipolar output voltages for each channel. The voltage of each channel can be set individually. Each ADC channel has a wide range of either full scale bipolar or unipolar input voltages that can be measured. Automatic input scanning is supported with good noise elimination.
The EXC-8000cPCI/xx is supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.
Mating connectors and cable adapters for I/O connection can be purchased seperately.
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
|EXC-8000cPCI/xx||Multi-protocol interface for Compact PCI compatible systems [up to 6 modules].|
|Px M8KADDA||A2D & D2A interface module.|
|X8K-xx||50cm cable adapter for EXC-8000 card [optional]|
|EXC-8000CON||Connector assembly [optional]|
"xx” specifies the modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.