EXC-4000cPCI/xx card & M4KSerial module

The EXC-4000cPCI/xx card for Compact PCI systems supports up to sixteen Serial channels using the M4KSerialPlus module. This module supports up to four independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232 and has a programmable baud rate of up to 10 Mbps. The module operates independently of the host computer, reducing the need for host intervention.

The EXC-4000cPCI/xx is supplied with C drivers, including source code. Mating connector provided for I/O connection.
Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.

NOTE: The M4KSerial module is now a Legacy product. All new projects should use the M4KSerialPlus module (these modules are not compatible)  Click here for more details

Ordering Information: 

Part Number   Description
EXC-4000cPCI/xx  Multi-protocol interface for Compact PCI compatible systems. (3U)
EXC-4000cPCI/xx-002 Same as above with P2 Rear I/O connector. For 32-bit systems only.
EXC-4000cPCI6U Multi-protocol interface for Compact PCI compatible systems (6U)
Jx   M4KSerial2    RS-232/422/485 interface module - Supports 2 channels. *LEGACY*
JJx   M4KSerialPlus2 RS-232/422/485 interface module - 10Mbps - Supports 2 channels.
Kx   M4KSerial4   RS-232/422/485 interface module - Supports 4 channels. *LEGACY*
KKx   M4KSerialPlus4 RS-232/422/485 interface module - 10Mbps - Supports 4 channels.
X4K-xx 50cm cable adapter for EXC-4000 card [optional]

                                                                                   
Note:      
"xx” specifies the modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

contact us
Your message was sent successfully
 
Home Login