SERIAL

NOTE: The M4KSerial module is now a Legacy product. All new projects should use the M4KSerialPlus module (these modules are not compatible)  

 

M4KSerialPlus Comparison to M4KSerial

PARAMETERS

M4KSerialPlus

M4KSerial

Module ID (on carrier board)

12h

02h

Uart Type

Exar XR16M570

Exar XR16L651

Baud

Up to 10Mbps

Up to 2Mbps

Uart Selectable Input Clocks

x4: 14.7456, 24.0, 32.0, 40.0 MHz

x3: 14.7456, 24.0, 32.0 MHz

Receive Fifo

16Kx16

16Kx9

Transmit Fifo

16Kx9

8Kx9

Additional Interrupts Conditions on RcvCount and RcvPattern

Yes

No

Programmable Gap Between Transmitted Bytes

Yes

No

Total Byte Count Tx/Rx 32bit Counters

Yes

No

Enhanced Receive Throughput

Yes

No

Optional Enhanced RS232 3Mbps transceiver (4 chs)

Yes

No

Optional Isolated modular transceiver (2channels only)

Yes

No

Time Tag Resolution

x2: 1usec or 10usec

x1: 10usec

Click here for more details

Excalibur Systems

SerialPlus Module

M4KSerialPlus

The M4KSerialPlus module supports up to four independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232 and has a programmable baud rate of up to 10 Mbps.
Excalibur Systems

Serial Module

M4KSerial

The M4KSerial module supports up to four independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232 and has a programmable baud rate of up to 1Mbps. *** NOW A LEGACY PRODUCT ***
contact us
Your message was sent successfully
 
Home Login