EXC-Unet2/Rx
Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.
Ordering Information:
| Part Number | Description |
| EXC-Unet2/xx | Multi-protocol interface for USB or Ethernet equipped computers |
Note:
"xx” specifies the modules ordered with the carrier board (up to 4 modules).
"-001" added to the end of the part number specifies conformal coating option.
Available Modules for the EXC-Unet2
| A* - ARINC-429 |
Five programmable channels A1 = 5 receive channels A2 = 4 receive 1 transmit A3 = 3 receive 2 transmit A4 = 2 receive 3 transmit A5 = 1 receive 4 transmit A6 = 5 transmit channels |
| C* - ARINC-708 |
Two programmable channels C1 = 1 transmit 1 receive C2 = 2 receive channels |
| F* - MIL-STD-1553 |
One multi function channel F1 = transformer coupled F2 = direct coupled |
| H* - MIL-STD-1760 |
One single function channel H1 = transformer coupled H2 = direct coupled |
| I* - Discrete I/O |
10 D I/O, TTL/Avionics 0-32V DC I1 = 10 channel input I2 = 4 chnl output 6 chnl input I3 = 6 chnl output 4 chnl input I4 = 10 channel output |
| J* - RS232/422/485 |
Two channels, Baud rate RS-232 up to 3 Mbps, RS-422/485 up to 4 Mbps J1 = 2 channel RS-232 J2 = RS-232 / RS-485 J3 = RS-232 / RS-422 J4 = 2 channel RS-485 J5 = RS-485 / RS-422 J6 = 2 channel RS-422 |
| L* - MIL-STD-1760 |
One multi function channel L1 = transformer coupled L2 = direct coupled |
| M* - MIL-STD-1760 |
Monitor only (transmit disabled) M1 = transformer coupled M2 = direct coupled |
| N* - ARINC-717 |
Two channels Rx/Tx, HBP and BPRZ signals N1 = HBP N2 = BPRZ |
| R* - MMSI |
Five channels meets requirements of AS5643, 10Mbps 1553 Protocol/RS-485 Transceivers R5 = 5 EBR-1553 hub ports and 1 cBM port |
| S* - ARINC-825 |
Five channels S5 = 5 ARINC-825 channels |
| T* - MIL-STD-1553 |
One single function channel T1 = transformer coupled T2 = direct coupled |
| V* - MIL-STD-1553 |
Monitor only (transmit disabled) V1 = transformer coupled V2 = direct coupled |
