EXC-4000cPCI Multi-Protocol Board

Excalibur Systems

The board supports up to 4 modules, and each module represents an independent test and simulation device. Most modules are based on existing Excalibur products such as the 1553 Px family, the 1553 MCH family and the ARINC429 RxTx. 

Additional modules are being added constantly. The EXC-4000 family represents a breakthrough in flexibility for avionics test equipment permitting the simulation of an entire test suite from a single board. It is, for example, possible to control 20 ARINC-429 channels, a 1553 channel and discrete I/O from a single EXC-4000PCI board. Most modules are dual port RAM processor based and offer a simple and powerful interface to the card. 

The EXC-4000cPCI is supplied with C drivers, including source code. Mating connector provided for I/O connection.

Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.

Ordering Information:

Part Number Description
EXC-4000cPCI/xx Multi-protocol interface for Compact PCI compatible (3U) systems.
EXC-4000cPCI/xx-002 Same as above with P2 Rear I/O connector. For 32-bit systems only.
EXC-4000cPCI6U/xx Multi-protocol interface for Compact PCI compatible (6U) systems.
X4K-xx 50cm cable adapter for EXC-4000 card [optional]

 

Note:
“xx” specifies the modules ordered with the carrier board (up to 4 modules).
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

contact us
Your message was sent successfully
 
Home Login