EXC-4000PCI Multi-Protocol Board

Excalibur Systems
4000PCI
Excalibur Systems
4000PCI-HC

The board supports up to 4 modules, each module represents an independent test and simulation device.

Modules available include MIL-STD-1553,  MIL-STD-1760,  MMSI, H009,  ARINC-429,  ARINC-708, Serial, Discrete and CAN bus. The EXC-4000PCI represents a breakthrough in flexibility for avionics test equipment permitting the simulation of an entire test suite from a single PCI board. It will, for example, be possible to control 20 ARINC-429 channels, a 1553 channel and discrete I/O from a single board. Most modules are dual port RAM processor based and offer a simple and powerful interface to the card. 

The EXC-4000PCI is supplied with C drivers, including source code. Mating connector provided for I/O connection. 

Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.

Ordering Information:

Part Number Description
EXC-4000PCI/xx Multi-protocol interface for PCI compatible systems
X4K-xx 50cm cable adapter for EXC-4000 card [optional]
EXC-4000PCI-HC/xx Multi-protocol interface for PCI compatible systems half size card


Note:
"xx” specifies the modules ordered with the carrier board (up to 4 modules).
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

contact us
Your message was sent successfully
 
Home Login
This site is not supported by your browser Please download Google Chrome