EXC-4000VME/xx, EXC-4000VXI/xx card & M4K1553Px(S)-1760 module

The EXC-4000VME/xx and EXC-4000VXI/xx cards for VME & VXI systems supports up to eight dual redundant MIL-STD-1760 channels using the M4K1553Px(S)-1760 module and is compatible with all common variations of MIL-STD-1760 (A, B).  Each channel can operate simultaneously as a Bus Controller and up to 32 Remote Terminals and as a Triggerable Monitor.  In addition, Checksum, SRQ bit and Header Words are supported on each channel. 

Multi Function:

Each channel using the M4K1553Px-1760 module operates simultaneously as a Bus controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. In addition, error injection (BC and RT modes) and error detection (all modes) are supported on each channel. 

Single Function:

Each channel using the M4K1553PxS-1760 (RT validated) module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.

The EXC-4000VME/xx and EXC-4000VXI/xx is supplied with C drivers (including source code), Merlin+ Windows software and  may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application. Mating connector provided for I/O connection.

Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.

Ordering Information:

Part Number  Description
EXC-4000VME/xx Multi-protocol interface for VME compatible systems B-size board.
EXC-4000VXI/xx  Multi-protocol interface for VXI compatible systems C-size board, complete with shield
Lx   M4K1553Px-1760 MIL-STD-1553 interface module: supports BC, multiple RTs,
BC/Concurrent-RT and BM modes with MIL-STD-1760 option.
Hx  M4K1553PxS-1760 MIL-STD-1553 interface module: supports BC, RT or BM modes
with MIL-STD-1760 option.  (RT Validated-Single Function)
X4K-xx  50cm cable adapter for EXC-4000 card [optional]

“xx” specifies the modules ordered with the carrier board.
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

contact us
Your message was sent successfully
Home Login
This site is not supported by your browser Please download Google Chrome