EXC-4000cPCI/xx card & M4K1553Px(S) module
The EXC-4000cPCI/xx card for Compact PCI computers supports up to four dual redundant 1553 channels using the M4K1553Px(S) module and is compatible with all common variations of MIL-STD-1553 (A, B).
Each channel using the M4K1553Px module operates simultaneously as a Bus controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. In addition, error injection (BC and RT modes) and error detection (all modes) are supported on each channel.
Each channel using the M4K1553PxS (RT validated) module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.
NOTE: the M4K1553PxS module is NOT compatible to the M4K1553MCH module.
The EXC-4000cPCI/xx is supplied with C drivers (including source code), Merlin+ Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application. Mating connector provided for I/O connection.
Please see multi protocol 4000 modules for additional information on protocols that can be added to this card.
|EXC-4000cPCI/xx||Multi-protocol interface for Compact PCI (3U) compatible systems.|
|EXC-4000cPCI6U/xx||Multi-protocol interface for Compact PCI (6U) compatible systems.|
|EXC-4000cPCI/xx-002||Same as above with P2 Rear I/O connector. For 32-bit systems only.|
|Fx M4K1553Px||MIL-STD-1553 interface module: supports BC, multiple RTs, BC/Concurrent-RT and BM modes.|
|Tx M4K1553PxS||MIL-STD-1553 interface module: supports BC, RT or BM modes. (RT Validated-Single Function)|
|X4K-xx||50cm cable adapter for EXC-4000 card [optional]|
“xx” specifies the modules ordered with the carrier board. "-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.
"-001" added to the end of the part number specifies conformal coating option