ES-9810/A0 (RUNET II)

The EXC-9810/Ax is an Ethernet adapter supporting up to twenty ARINC-429 channels in any combination of transmit and/or receive. All of the channels feature error injection and detection.adapter. Its small size and ability to interface through Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the ARINC-429 bus, both in the lab and in the field.

The receive channels allow for the storage of all selected labels with status and time tag information appended to each word, and also allow for filtering and multi-storage modes of data words. The transmit channels operate via a transmit ‘instruction stack’ which allows scheduling of data transmissions and reduces the need for host computer intervention. The EXC-9810 supports up to four independent 8000 family avionics communication modules, allowing multiple different protocols to be mixed and matched on a single card. Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.

The EXC-9810/Ax adapter is supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher). Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.

Ordering Information:

Part Number     Description

EXC-9810/A0xxx       Multi-protocol interface for USB or Ethernet equipped computers

Note: "xx” specifies the modules ordered with the carrier board (up to 4 modules).

Available Modules for the EXC-9810

ARINC-429 Modules

A0 - 5 Channels ARINC 429 module, Software selectable for Receive or Transmit

ARINC-708 Modules

C0 - 2 Channels ARINC 708/453 module, SW selectable as Tx or Rx

MIL-STD-1553 multi-function Modules

F1- Transformer coupled mode

F2- Direct coupled mode

MIL-STD-1760 single function Modules

H1- 1760 Transformer coupled mode

H2- 1760 Direct coupled mode

Discrete Modules

I0- 10 Ch Discrete, SW selectable for In/Out and TTL/Avionics 0-32 Volt thresholds

Serial Modules

J1- Ch0 RS232, Ch1 RS232   J2- Ch0 RS232, CH1 RS485      J3- Ch0 RS232, CH1 RS422

J4- Ch0 RS485, Ch1 RS485   J5- Ch0 RS485, CH1 RS422      J6- Ch0 RS422, CH1 RS422

MIL-STD-1760 multi-function Modules

L1- 1760 Transformer coupled mode

L2- 1760 Direct coupled mode MIL-STD-1760 monitor only Modules

M1- PxM-1760 Transformer coupled mode

M2- PxM-1760 Direct coupled mode

ARINC-717 1Rx & 1Tx channels Modules

N1- HBP signals

N2- BPRZ signals

Analog to Digital & Digital to Analog Modules

P1- DAC outputs only (10 Single Ended or 5 Differential)

P2- ADC inputs only (5 Single Ended or 5 Differential)

P3 = Combined DAC and ADC (4 Single Ended or 2 Differential DAC outputs and 3 Single Ended or 3 Differential ADC inputs)

MMSI Modules

R5- 5 ports EBR-1553 hub +1 cBM port (10 Mbps 1553 protocol, RS-485 front-end)

ARINC-825 (Canbus) Modules

S5- 825CAN 5ch

MIL-STD-1553 single function Modules

T1- Transformer coupled mode

T2- Direct coupled mode

MIL-STD-1553 monitor only Modules

V1- Transformer coupled mode

V2- Direct coupled mode