*** NEW ***

The EXC-1553ExCard/Px is a multi-channel (up to two) MIL-STD-1553 interface board for Express Card compatible computers.  Each dual redundant MIL-STD-1553 channel can operate simultaneously as a Bus Controller and up to 32 Remote Terminals and as a Triggerable Monitor.

*** NEW ***

The 4000 PCI Express carrier board was developed to meet the needs of avionic testers for multi-protocol integrated, digital bus testing using PCI Express.

 *** NEW ***

This cost effective board supports up to 2 modules, each module represents an independent test and simulation device. Modules currently include ARINC-429, ARINC-708 / 453, Serial (RS-232 /422/485), Discrete and CAN bus.

The EXC-4000P104plus is a multiprotocol P104plus interface board for avionics test and simulation applications. Each board holds up to five independent modules. Ideal for embedded systems.

is a cost-effective avionics monitoring and simulation application for MIL-STD-1553 & ARINC-429 that streamlines data acquisition, processing and translation into meaningful engineering units, raw data and graphical displays.

  Small & Lightweight, the LANCE is a cost-effective hand-held solution for portable data recording and monitoring of MIL-STD-1553 or ARINC-429. Drivers available for design of own application.

*** NEW & IMPROVED DESIGN ***

A ruggedized notebook with built-in MIL-STD-1553 and/or ARINC-429 interface cards for data bus analysis & recording.

An advanced, ruggedized PC104 and PC104+ system in an enclosed, modular casing. The system is appropriate as a mission computer or for use in data acquisition and recording for any combination of ARINC-429, MIL-STD-1553, Serial, Discrete or similar types of communication.

MIL-STD-1553 VME up to 16 channels

The EXC-1553ccVME/Px is a multi-channel (up to sixteen) MIL-STD-1553 interface board for conduction cooled VME systems.  Each dual redundant MIL-STD-1553 channel can operate simultaneously as a Bus Controller and up to 32 Remote Terminals and as a Triggerable Monitor.

The EXC-1553ccPMC/Px is a multi-channel (up to four) MIL-STD-1553 interface board for conduction cooled PCI Mezzanine Card compatible computers.  Each dual redundant MIL-STD-1553 channel can operate simultaneously as a Bus Controller and up to 32 Remote Terminals and as a Triggerable Monitor.

The DAS-429ccPMC/RTx is a conduction cooled PMC card which supports five, ten, fifteen or twenty ARINC-429 channels. The DAS-429ccPMC/RTxD is a conduction cooled PMC card which supports five, ten or fifteen ARINC-429 channels and eight Discretes [4 Inputs and 4 Outputs].

The EXC-708ccPMC is an ARINC-708 /453 interface board for conduction cooled PCI Mezzanine Card systems. The board supports two or four ARINC-708 /453 channels.

The DAS-429PCMCIA/RT6D4 card supports up to six programmable ARINC-429 channels and any combination of four bidirectional input and output discrete channels.

The EXC-PS104P power supply is a high performance DC to DC converter designed for aerospace, military and high-end industrial applications.The EXC-PS104P is ideal for low noise embedded computer systems and is specifically designed to comply with MIL-STD-416D and MIL-STD-704A/B.

The EXC-1394PCIe card for the PCI Express bus is an intelligent test and simulation card for interfacing to an IEEE-1394 data bus (AS5643). It implements a 1394b PHY layer, operating at 100, 200, or 400 Mbps.

Box Couplers are the key component in the fabrication of your bus architecture. Excalibur provides a full line of standard couplers listed in the catalog as well as custom couplers to your requirements. Excalibur's products are cost competitive, with delivery from stock.

MIL-STD-1553 Bus Switches are devices that enable system architecture to be reconfigured. This reconfiguration is mostly accomplished in the test environment and includes but is not limited to simulation of missile firing and switching in or out a new section of bus interface.

The ESI-1553RPT MIL-STD-1553 Repeater box was developed for customers who need to extend the existing length of their bus or provide the capability to utilize long stubs or to connect a number of devices to a single stub.

IN-LINE COUPLERS are predominately utilized in airborne applications but can also be used where space is limited such as testers and simulators. Couplers are provided with a standard cable length but custom cable lengths can be procured at a nominal cost. The products were designed to meet the environmental requirements imposed by the military, including the temperature range of -55°C to 125°C.

Excalibur provides a variety of terminators that includes, 78 ohm, 3K ohm and others.

Excalibur Cable Plugs & Jacks are built to last with superior mechanical performance and rugged physical properties